Saturday, July 7, 2007

Sapphire Radeon HD 2600 XT 256MB GDDR4



Once again, Sapphire provided us with its Radeon HD 2600 XT 256MB GDDR4 for evaluation. This turned out to be a reference model that's probably indistinguishable from that of other brands except for the Sapphire decals. The card itself is longer than Radeon HD 2600 PRO, though like the other mainstream cards, it comes with a single slot cooler reminiscent of the ones found on the Radeon X1950 PRO.

As expected from one of ATI's biggest partners, Sapphire has quickly rolled out its lineup of mainstream Radeon HD graphics cards.

It's a Sapphire labeled reference Radeon HD 2600 XT 256MB GDDR4 using the default single slot cooler that's extremely quiet. No power connectors are required due to the relatively low power draw of around 45W.

The lower power draw of the 65nm core makes its point here, as the Sapphire Radeon HD 2600 XT does not require a Molex power connector, taking its juice directly through the PCIe interface. According to ATI, the power consumption of this card should be around 45W. The smaller and cooler core is also a factor for the ultra quiet cooling fan, which is something that we liked a lot. The memory chips are all passively cooled by the heatsink as this industrial looking piece of aluminum covered most of the red PCB.

Underneath the red translucent plastic shroud, the heatsink is an industrial looking design with none of the fancy colors you may find in other brands.

Native CrossFire is supported and Sapphire has also included the required bridge connector in its package.

Dual-link DVI outputs are found at the back. An included DVI-to-HDMI converter is included to enable users to hook this card to a HD display. HDCP support naturally is present.

The core runs at 800MHz, only 200MHz higher than the Radeon HD 2600 PRO but the memory does get a larger boost to 2200MHz DDR. Compare this against the maximum 1000MHz DDR on the PRO. Of course, with NVIDIA's GeForce 8600 GTS running with a 2000MHz DDR memory clock, ATI's numbers are not that much higher, especially with its GDDR4 memory. The number of stream processing units is the same for all the Radeon HD 2600 cards, topping out at 120 organized into groups of five each. CrossFire is supported, with interconnects at their usual places and Sapphire has included the bridge for that in its package. Other items that we found in our box include:

# 1 x DVI-to-HDMI adaptor
# 1 x DVI-to-VGA adaptor
# 1 x 9-pin mini-DIN to Component/S-Video dongle
# 1 x CrossFire bridge
# Driver CD
# User manual

Continue.....

Source from HardwareZone

3 comments:

Sarah84vn said...

i'm just arossing ur blog, hoping ur are doing well, nice weekend!

Celular said...

Hello. This post is likeable, and your blog is very interesting, congratulations :-). I will add in my blogroll =). If possible gives a last there on my blog, it is about the Celular, I hope you enjoy. The address is http://telefone-celular-brasil.blogspot.com. A hug.

saya said...

I think your blog post is good, but may low traffic. Do you want to get more visitor to read your nice post?
I can give you some easy tips, I promiss you will get more and more visitor to your blog.
Go and read this now Click here to see how